Two ideas sit underneath almost every good real estate investment. The first is that a business plan creates value only if the income it produces, relative to everything spent, exceeds what the market requires for a finished asset. That is yield on cost. The second is that a price well below what it would cost to build a competing building protects an owner when markets turn. That is basis relative to replacement cost. This entry explains both.
Yield on cost
Yield on cost (YOC) is stabilized NOI divided by total cost:
Yield on cost = stabilized NOI ÷ (purchase price + closing costs + capital spending + carrying costs during the plan)
Total cost should include everything needed to reach stabilization: renovation and capital spending, leasing commissions and tenant improvements, lost income during renovation, and the cost of carrying the property through lease-up.
The development spread
The spread between yield on cost and the market cap rate for the finished asset measures value creation:
Spread = yield on cost − market cap rate
Illustrative arithmetic only. Total cost is $55M. Stabilized NOI is $3.6M, a 6.5% yield on cost. Comparable stabilized assets trade at a 5.5% cap rate. The spread is 100 basis points. The implied stabilized value is $3.6M ÷ 5.5%, or about $65.5M, roughly $10.5M above cost.
How much spread is enough depends on risk. A light renovation in a deep submarket needs less than a conversion with an uncertain tenant. As a rough guide, many value-add investors look for spreads of 100–200 basis points or more, and wider for riskier plans. A thin spread leaves no room for the things that go wrong.
Yield on cost by lever
It helps to calculate the return on each component of a plan separately:
| Lever | Cost | Annual NOI added | Return on cost |
|---|---|---|---|
| Interior renovations, 150 units | $1.8M | $288,000 | 16.0% |
| Ratio utility billing | $40,000 | $120,000 | Very high |
| Clubhouse and pool refresh | $600,000 | $30,000 | 5.0% |
| Roof replacement | $1.2M | $0 directly | Defensive |
Illustrative numbers only. A table like this shows which spending earns its keep and which is defensive. Defensive capital, such as a roof, does not add income but protects it; it belongs in the plan, but it should not be confused with value creation.
Basis
Basis is what you pay, all in. It is commonly expressed per unit for apartments, per square foot for industrial and medical office, and per megawatt for data centers, so that it can be compared with other sales and with replacement cost.
A sound basis does three things:
- It protects against new competition. If a competitor would have to spend far more to build a similar building, it will need far higher rents to justify building it. That limits new supply at your rent level.
- It protects in a downturn. If values fall, a building bought well below replacement cost is less likely to be worth less than the debt on it.
- It widens the range of good outcomes. A low basis lets a property compete on rent while still earning a sound return.
Replacement cost
Replacement cost is what it would cost today to build a functionally equivalent building on an equivalent site: land, hard costs (construction), soft costs (design, permits, financing, fees) and a developer’s profit.
Illustrative arithmetic only. Estimating replacement cost for a garden-style community:
| Component | Per unit |
|---|---|
| Land, entitled | $30,000 |
| Hard costs | $190,000 |
| Soft costs and financing | $45,000 |
| Developer profit | $25,000 |
| Replacement cost | $290,000 |
If a comparable 1990s community, renovated, can be bought for $180,000 per unit plus $15,000 of renovation, the all-in basis of $195,000 is about two-thirds of replacement cost. New construction would need much higher rents to make sense, so the older property can compete on price. Real costs vary enormously by market, product type and year, and these numbers are only an illustration.
Depreciated replacement cost
An older building is not worth full replacement cost. Appraisers deduct physical depreciation (wear), functional obsolescence (layouts, low clear heights, inefficient systems) and external obsolescence (changes in the neighborhood or market). Comparing basis with full replacement cost overstates the margin of safety; comparing it with depreciated replacement cost is more honest.
Basis in each sector
- Multifamily: price per unit and per rentable square foot, compared with renovated comparables and new construction.
- Light industrial: price per square foot, compared with infill land values plus construction cost. In infill markets, land is often the hardest part to replace.
- Data centers: price per megawatt of delivered or committed power, because power, not floor area, is the scarce input.
- Cold storage: price per square foot or per cubic foot, compared with the high cost of new temperature-controlled construction.
- Medical office: price per square foot, adjusted for tenant improvements and the health-system affiliation.
How we use these ideas
We focus on what we pay relative to replacement cost and to what comparable buildings trade for, because a sound basis protects capital when everything else goes wrong. A plan with a strong spread on a high basis is fragile; a plan with a modest spread on a low basis is often the better investment for a long-term owner. Read NOI and cap rates for the income side of the equation and the underwriting overview for how the pieces fit together.
Red flags
- A yield on cost that only beats the market cap rate on pro forma rents.
- Capital budgets that leave out lost income during renovation.
- Replacement cost estimates that leave out land or developer profit.
- A basis justified only by today’s low cap rates.
This entry is general information as of November 2026, not investment, legal or tax advice, and not an offer of securities.