CaldrionReal EstateSearchSubmit an acquisition

Knowledge baseIndustrial & logistics

Shallow-bay light industrial: a guide to infill industrial

Why multi-tenant light industrial and shallow-bay warehouses of 20K–200K sq ft in infill locations behave differently from big-box logistics, and how value is added through leasing, land and functional capital.

Industrial real estate is often discussed as if it were one market, but a 1,000,000 sq ft distribution center on an interstate and a 60,000 sq ft multi-tenant building in an infill business park are different businesses. We focus on the second: multi-tenant light industrial and shallow-bay warehouses of 20K–200K sq ft, in land-constrained infill locations close to the consumers and businesses they serve.

What “shallow-bay” means

Industrial buildings are divided into bays, and the depth of a building determines how it can be leased. Shallow-bay buildings are typically less than about 150–200 feet deep, which makes them easy to divide into suites of a few thousand to a few tens of thousands of square feet, each with its own office area, loading and entrance.

FeatureShallow-bay / light industrialBig-box bulk distribution
Building sizeOften 20,000–200,000 sq ftOften 250,000 to over 1,000,000 sq ft
Suite sizeA few thousand to tens of thousands of sq ftWhole building or large sections
TenantsMany small and mid-sized local businessesOne or a few large logistics users
Clear heightOften 16–28 feet in older stockOften 32–40 feet in modern stock
LoadingMix of grade-level and dock-high doorsMany dock-high doors, deep truck courts
Lease termsOften 3–5 yearsOften 5–15 years
New supplyConstrained by land cost and zoningEasier to build on greenfield land

These are typical characteristics, not definitions.

Who the tenants are

Contractors, plumbers and electricians; local distributors of building supplies, food or auto parts; light manufacturers and assemblers; service businesses such as HVAC and pest control; e-commerce and last-mile operators; and businesses that need a showroom with a loading door. They want to be close to their customers and their employees, and moving is costly and disruptive for them, which makes renewal rates attractive in good locations.

Why infill and why small

  • Scarce land. In established metro areas, the land zoned for industrial use near dense population is largely built out, and some is being rezoned for housing. Replacement cost is high, and new small-bay supply is limited because it is often more economical for developers to build large boxes on cheaper land.
  • Granular tenancy. A diverse roster of smaller tenants means no single lease decides the outcome.
  • Proximity premium. As e-commerce matures, being close to the end consumer matters more, because the final mile is the most expensive part of delivery.

Our market note Small bays, scarce land develops the thesis.

How value is added

Mark-to-market

Shorter lease terms let rents be brought to market as leases roll, while good tenants who want to stay are kept.

Illustrative arithmetic only. A 90,000 sq ft building is leased at an average $9.50 per sq ft, net. Comparable space leases at $12.00. If 60% of the space rolls to market over three years, net income rises by about $135,000 a year ($2.50 × 54,000 sq ft), less leasing commissions, tenant improvements and downtime. At a 6.5% cap rate, that is roughly $2.1M of value before those costs.

Industrial outdoor storage (IOS)

Sites with low site coverage (building footprint as a share of land) often have excess land that can be paved, fenced and leased for trailer parking, equipment storage or fleet yards. Demand is strong and supply is scarce, because many municipalities restrict new outdoor storage uses. The Atlanta case study shows the approach.

Functional capital

Roof replacements, LED lighting, truck court repairs, new dock equipment, additional grade-level doors, electrical service upgrades and modernized office areas attract and retain credit-grade tenants and support higher rents.

Lease structure

Older multi-tenant buildings sometimes have gross or modified gross leases. Converting to triple-net as leases roll moves property tax, insurance and maintenance cost increases to tenants, protecting net income against inflation. See commercial leases and lease structures.

Key metrics

  • In-place rent versus market rent, by suite.
  • Weighted average lease term (WALT) and the lease expiration schedule by year.
  • Tenant retention history and downtime between leases.
  • Leasing costs per renewal and per new lease: tenant improvements and commissions.
  • Clear height, loading ratio, power, column spacing, truck court depth and parking.
  • Site coverage and any excess land.
  • Price per square foot against replacement cost.

Risks we watch

  • Tenant credit. Small businesses fail more often than large ones; diversification is the mitigation.
  • Functional obsolescence. Very low clear heights or poor truck access limit the tenant pool.
  • Environmental history. Past industrial uses can leave soil or groundwater contamination. A Phase I environmental site assessment is essential, and a Phase II when the history calls for it.
  • New supply. Less common in infill locations, but not impossible.
  • Zoning. IOS uses in particular depend on local zoning and can be grandfathered rather than permitted outright.

Case studies

See the Nashville shallow-bay portfolio, light industrial with excess land in Atlanta and the Charlotte owner-user sale-leaseback, converted to multi-tenant use.

What we do not buy

Big-box bulk distribution sits outside our criteria. Single-tenant buildings can fit when they are divisible and well located, as the Charlotte case study shows, but the core of the strategy is multi-tenant.

This entry is general information as of November 2026, not investment, legal or tax advice, and not an offer of securities.