Cold storage is warehouse space held at controlled temperatures for food, beverages, pharmaceuticals and other perishables. It is one of the most technical forms of industrial real estate, and much of the US stock is old: many facilities were built decades ago with lower clear heights, older refrigeration systems and layouts poorly suited to modern distribution. New construction is costly and complex, which limits supply and makes well-located, well-equipped facilities hard to replace. Our focus page describes the sector as we approach it.
Types of facility and temperature zone
| Zone | Typical temperature range | Common contents |
|---|---|---|
| Deep freeze | Well below 0°F | Ice cream, some seafood, specialized products |
| Freezer | Around −10°F to 0°F | Frozen food, meat, prepared meals |
| Cooler | Roughly 33°F to 55°F | Produce, dairy, beverages, some pharmaceuticals |
| Ambient controlled | Roughly 55°F to 70°F | Confectionery, some pharmaceuticals, wine |
Many facilities combine zones, and convertible rooms that can switch between cooler and freezer are valuable for flexibility. Ranges are typical, not standards.
Facility types include:
- Public refrigerated warehouses, run by third-party logistics operators storing goods for many customers.
- Private distribution centers, run by grocers, food distributors or manufacturers for their own goods.
- Last-mile food hubs, smaller facilities near population centers serving grocery delivery and foodservice.
- Port-adjacent facilities, serving imported and exported perishables. The Savannah case study is an example.
What makes the building different
- Insulated envelope. Insulated metal panels for walls and roof, with careful vapor barriers.
- Floor and slab. Freezer floors need insulation and under-slab heating or ventilation to prevent frost heave, where ground moisture freezes and lifts the slab. Damage is expensive to repair.
- Refrigeration system. Large facilities often use ammonia systems, which are efficient but regulated: facilities holding more than 10,000 pounds of anhydrous ammonia fall under OSHA’s process safety management standard and the EPA’s risk management program. Newer facilities increasingly use lower-charge ammonia, CO₂ or hybrid systems.
- Power. Large, reliable electrical service and, often, backup generation.
- Clear height and racking. Modern facilities are often built taller to use cube efficiently, sometimes with automated storage.
- Docks. Insulated, sealed dock doors and refrigerated staging areas to protect the cold chain.
Why supply is limited
Building cold storage costs several times what a comparable dry warehouse costs, requires specialized contractors, and must be designed around a refrigeration system with long lead times for equipment. Lenders and developers are cautious with speculative cold storage because the tenant pool is narrower and the operating demands are high. Meanwhile, online grocery, the growth of fresh and frozen food categories, and pharmaceutical distribution have increased demand for modern capacity in the right locations.
How value is added
Dry-to-cold conversion
Retrofitting a well-located dry warehouse with modern refrigeration, when the structure, site, power and slab can accept it, can earn the premium rents that temperature-controlled space commands at a cost below new construction. The Dallas–Fort Worth case study describes one.
Illustrative arithmetic only. A 100,000 sq ft dry warehouse leases at $7 per sq ft net, $700,000 a year. A conversion costs $15M, and the converted building leases at $16 per sq ft net, $1.6M a year. The incremental $900,000 of income on $15M of cost is a 6% return on the conversion. Whether that is attractive depends on the cap rate for cold storage in the market, the tenant’s credit and the lease term. A conversion that earns a thin spread over the market cap rate is not worth the risk.
Expansion
Adding freezer capacity where an existing tenant needs it, with capital spending sized to the lease and to the tenant’s commitment.
Specialist operation
Working with operators who understand the energy, maintenance and food-safety demands that make this asset class difficult to run, and therefore difficult to compete with.
Key diligence questions
- Refrigeration: type, age, capacity and condition of compressors, condensers and evaporators; refrigerant and regulatory compliance.
- Slab: under-slab heating, any history of frost heave, floor flatness.
- Envelope: panel condition, roof, vapor barrier integrity.
- Power: service size, redundancy and backup generation.
- Energy cost and who pays it under the lease.
- Food safety and certifications required by tenants.
- Tenant: credit, business model and term.
Risks we watch
- Energy prices. Refrigeration is energy-intensive; leases should make clear who bears the cost.
- Mechanical failure. A refrigeration failure can destroy a tenant’s inventory; maintenance, monitoring and insurance matter.
- Regulatory compliance for ammonia and other refrigerants.
- Tenant concentration, as many facilities have one or two tenants.
- Obsolescence of older facilities with low clear heights and poor layouts.
- Overbuilding in specific markets: speculative cold storage construction rose in the early 2020s, and some markets absorbed it slowly.
Cold storage sits within our specialty sector. Transactions should fall within our criteria: $20M–$150M in gross asset value, in primary and secondary US markets.
This entry is general information as of November 2026, not investment, legal or tax advice, and not an offer of securities.